google-site-verification: google093b5d829febb78d.html Space Build X Rack & Pinion CNC Machine SBXB2030 - MASSO Controller @ Gadgitech Trading – Gadgitech Trading

Space Build X Rack & Pinion CNC Machine SBXB2030 - MASSO Controller

  • R 161,000.00
    Unit price per 
Tax included. Shipping calculated at checkout.


Space Build X Rack & Pinion CNC Machine SBXB2030 -  MASSO Controller

2x3m CNC Machine Specs:

Our Space Build X Rack & Pinion CNC Machine is designed on a rigid square tubing table, with 12mm aluminium y-axis brackets to eliminate any unwanted movement on the y-axis that's making the machine extremely rigid and as strong as possible for high accuracy cutting that's great for high production. This machine is perfect to cut aluminium, perspex, wood and other materials with high accuracy. Very good reliability with the MASSO Controller with it's ridged frame and aluminium extrusions. Including seven limit switches A+, A-, Y+, Y-, X+, X- and Z+ for the use as limits, homing, auto squaring and soft limits. With many upgradable options, electronically or mechanically like servo motors, 3kw air cooled or water cooled spindle kits, you are in the front seat to get your ideal CNC Machine built to your requirements.

 

2x3m CNC Machine Features: 

Footprint: 2000mm x 3000mm at the base *Stock size measured from base

Work Area: 1650mm x 2750mm x 80mm *Stock size

Cutting depth 80mm Depending on type of bit used.

Open ends allow pass through of longer materials.

50x50x2mm 900mm high Square Tubing frame/table painted black

5 cutting bits (1mm, 1.5mm, 2mm, 2.5mm, 3mm)

Collets 3mm, 4mm, 6mm & 8mm

Electronics controller box with 3m LAN cable connection (cable included)

Full HGR15 linear rail management with SFU20 ball screws for X axis with cable drag chains

Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains

Lead screw and HGR15 linear rail management for Z axis

2.2kw Air Cooled Spindle & VFD Kit

Manual Speed Controlled between 12 000 RPM – 24 000 RPM.

Maximum jog rate is 2000 - 6000 mm/min

Maximum feed rate is 1000 - 6000 mm/min

Auto homing and auto squaring 

*The machine comes mounted on a table with a MDF wasteboard including fastening clamps.

 

Requirements: 

Personal computer or Laptop running Windows 7, 8 or 10.

LAN port on computer

Free Downloadable Software & Free Downloadable Designing Program that's provided with the machine


Mechanical Specifications: 

3x Nema 34 stepper motors 4.5N.m

1x Nema 23 stepper motor 3N.m

Full HGR15 linear rail management with SFU20 ball screws for X axis with cable drag chains

Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains

Lead screw and HGR15 linear rail management for Z axis

Dual motors on Y axis.

7x Proximity Sensors - 2 on each axis (A+, A-, Y+, Y-, X+, X-, Z+)

Configured resolution: less than 0.1mm


Electronics Specifications:

4 Axis Stepper Motor Driver Controller Board - MASSO Controller with License Key.

24V 17A 400W Power Supply

230v AC Power Socket - Power Cable Provided

Emergency Stop Button

LAN Connection - LAN Cable Provided

All connecting fittings and cables

MASSO G3

Powerful. Stable. Guaranteed.

MASSO G3 is the most stable, reliable and easy-to-use CNC controller money can buy. Escape the reliability issues of PC-based controllers, which are vulnerable to external design flaws, incompatible software updates and viruses. No need to worry about installing drivers or motion cards, just wire the MASSO to your motor drives and enter calibration values to start machining.

With MASSO G3 you get:

Fully integrated hardware and software specifically designed to run CNC machines independently of a PC.

Lathe, Mill, Router, Plasma or WaterJet machine control with up to 5-axis control.

Built-in Wi-Fi for PC connectivity via MASSO-Link software. Remotely monitor machine status and send g-code files.

Simple, easy-to-use screen layout.

Tool path display so you can see and position your job in real time.

Four USB ports to directly connect keyboard, mouse, touchscreen and pen drive without the need for a USB hub.

Direct spindle control and MPG handwheel dial support.

The machine can be upgraded with the following: 2.2kW Water Cooled Spindle Kit | 3kW Air Cooled Spindle Kit | MPG Pendant

UPGRADES:

    2.2kW Water Cooled Spindle Kit Specification:

    2.2kW Water-cooled spindle kit.  This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing.  The only thing you will need to run the spindle is the cable between the spindle and the VFD, the power cable to the VFD and a water bath for the water pump.

    2.2kW Water-cooled Spindle for CNC machine.  This is a 3-phase spindle designed to work with a 2.2kW Variable Frequency Drive (VFD).  It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes.  The spindle is mounted to the gantry of the CNC machine with an aluminium bracket.  The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life.  This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone.  

    Specification:

    • Diameter: 80mm
    • Power: 2.2KW
    • Current: 10A
    • Voltage: 220V
    • Frequency: 0-400Hz
    • Speed: 10-24000rpm
    • Collet Size: ER20
    • Cooling: Water Cooled
    • Runout: 0.003mm - 0.005mm
    • Bearings: C7002 x 2, C7005 x 2
    • Collet size in spindle: 1/8' (3.175mm)
    • Additional collet sizes: 3mm, 4mm, 6mm & 8mm

    2.2kW Variable Frequency Drive (VFD) to drive a CNC machine spindle.  This drive can be controlled via hand or via a controller board.  There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting.  The VFD run off single phase 220V AC and the output is also 220V provided to the spindle.  It also comes with self controlled built in cooling which switches on when required.

    • Power: 2.2KW
    • Input Voltage: 220V AC (Single Phase)
    • Output Voltage: 220V 
    • Output Current: 10A
    • Input Frequency:50-60Hz
    • Output Frequency:0-400Hz
    • Input phase: Single phase
    • Output phase: 3 phase
    • Size: 170 x 125 x 163mm
    • Control: By hand via built in control panel or via digital signal from controller board

    3kW Water Cooled Spindle Kit Specification:

    This is the CNC Spindle Motor Air Cooled 3KW Kit. The CNC Spindle motor Air Cooled Spindle 3KW has 4 Bearings & 3.0kw VFD/inverter variable frequency driver spindle speed controls. This is the squared spindle design. It is used for Milling / Engraving and various types of projects.

    Product Specs:

    • Material: Stainless steel jacket, copper coil!
    • Application: Milling / Engraving
    • Cooling: Air cooling mode
    • Power Interface: Optional GX16 air plug, there are marked  1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
    • Power: 3KW
    • Voltage: 220V
    • Current: 10A
    • Runout Off: 0.003-0.005mm
    • Diameter(mm):105
    • Bearing type: 4 Bearing ,Angular contact bearings,P4 grade,2X7005C P4 DT and 2X7003C P4
    • Collet: ER20
    • Air Cooling ER20 collet chunk
    • Grease Lubrication
    • Phase: 3HP
    • Package Weight: 11.0 Kg

    VFD Specification:
    • Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us.
    • Output Voltage: 220VAC
    • Input Frequency: 48-63 Hz
    • Output Frequency: 0-400 Hz
    • Input Phase: 1 or 3 phase
    • Output Phase: 3 phase  

    MPG Pendant Specification:

    High quality MPG Pendant for CNC machines.  This is a general wired CNC pendant that can control up to 4 Axis CNC machines.  It is made from a tough soft touch plastic with metal casing on the inside.  The buttons and dial have a solid and quality feel to it which makes it easy to control your CNC machine.  On the pendant you can select the axis you want to move and the size of increments you want to move at with the dial.  It also includes a clip to hang the pendant when not in use and a magnet backside to be able to attach the pendant to any metallic surface.

    This pendant is a generic MPG pendant.  We sell it prewired for the DDCS V3.1 CNC controller.

      Specifications:

    • Number of axis: 4 axis
    • Increments: 1x, 10x and 100x
    • Emergency stop: Yes
    • Cable length: 2m with pigtail section for extra stretch. 
      • Please allow 14-21 working days for the machine to be ready.
          • Please allow 3-7 working days for delivery – depending on the delivery address.
          • Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.

            We Also Recommend