Space Build X 5.5w Laser Engraver Machine SBXL0505
CNC Laser Engraver MachinePlease note that this is a Laser Engraver Machine only and can't be used for Laser Cutting.
CNC Laser Engraver Machine Specs:
Size: 500mm x 500mm
Working Area 400mm x 400mm
1 x 5.5W Laser Module
3 x Nema 17 Stepper Motors
1 x 2 Axis Controller Board
1 x Green protective glasses
4.5 micro resolution - 30% higher resolution than systems in it's class
Z Axis travel 70mm - manual adjustable Z axis lenght
Attachment plate includes mounting holes for multiple attachments and tools.
Features Of Laser:
It has a variable lense to set the focus. The aluminium housing and forced air cooling ensures efficient cooling for optimal operation and long service life. The intensity of the laser can be adjusted via the TTL/PWM signal. Please see the table below for the materials that can be processed with this laser.
- Laser Type: Blue Engraving Laser
- Laser wavelength: 445 - 450nm (violet)
- Laser Output Power: 5.5 Watt
- Laser Input Power: 20 Watt
- This laser includes a set of laser protective goggles
- Spot type: Dotted (adjustable focus)
- Lense: Variable focus lense
- Cooling method: Forced Air Cooling
- Operating voltage: 12V DC
- Operating current: <3.2A
- Housing material: Anodized aluminum
- Module material: Copper
- Life Time: Up to 20 000 hours
- Working temperature:-40 to 70 Degree Celsius
|Material||0.5W Laser||2.5W Laser||5.5W Laser|
|3mm Balsa Wood||Engrave||Engrave||Engrave & Cut|
|5mm Balsa Wood||Engrave||Engrave||Engrave & Cut|
|250g Card Board||Engrave||Engrave||Engrave & Cut|
|300g Card Board||Engrave||Engrave||Engrave & Cut|
|250g Craft Card||Engrave||Engrave||Engrave & Cut|
|Non-woven Fabric||Engrave||Engrave & Cut||Engrave & Cut|
|Cotton Fabric||Engrave||Engrave & Cut||Engrave & Cut|
|Polyester Fabric||Engrave||Engrave||Engrave & Cut|
|Canvas||Engrave||Engrave||Engrave & Cut|
|Leather||Engrave||Engrave||Engrave & Cut*|
|MDF Wood||Engrave||Engrave||Engrave & Cut**|
|Acrylic / Perspex||-||Engrave||Engrave & Cut|
|Stone / Ceramic||-||-||Engrave|
|Painted Metal Surface||-||Engrave||Engrave|
|Bare metal surface||-||-||Engrave***|
|Anodized metal surface||-||-||Engrave|
*Can cut leather thinner than 3mm with multiple passes.
**Can cut MDF thinner than 3mm with multiple passes. Yellow MDF or Laser MDF works better than normal MDF.
***Metal engraving spray, powder or tape required for laser marking on bare metal surface.
- Machine needs minor assembling a easy to use assembling guide will be sent through.
- Please allow 7-14 working days for the machine to be ready.
- Please allow 3-7 working days for delivery – depending on the delivery address.
- Please note that we can courier the machine free of charge without insurance, if insurance is required please request insurance fees.
- Please note that delivery fees may apply depending on your location and depending on the size of the machine required.
- Due to the fact that when we deliver the machine personally the delivery fee will include assembling of the machine, setup of the machine, minimal training. Vaal @ R500, Gauteng @ R1000, North West, Free State @ R1500, Mpumalanga, Limpopo & KZN @ R2000-R3000, Cape Province @ R6500. Please request an accurate quote as the price will be influenced by the exact delivery location.